Publikationen am Institut für Chemie und Biotechnik

Anzahl der Treffer: 878
Erstellt: Wed, 24 Apr 2024 23:09:55 +0200 in 0.0628 sec


Chen, Li-Yu; Khan, Nida; Lindenbauer, Annerose; Nguyen, Thi-Huong
When will Fondaparinux induce thrombocytopenia?. - In: Bioconjugate chemistry, ISSN 1520-4812, Bd. 33 (2022), 8, S. 1574-1583

The pentasaccharide Fondaparinux, a synthetic selective factor Xa inhibitor, is one of the safest anticoagulants in the heparin family that is recommended as an alternative drug for patients with hypersensitivity to other drugs such as heparin-induced thrombocytopenia (HIT). However, some observations of Fondaparinux-induced thrombocytopenia (FIT) have been reported while others claimed that FIT does not occur in patients with fondaparinux therapy, indicating that the mechanism of FIT remains controversial. Here, we utilized different methodologies including dynamic light scattering, immunosorbent and platelet aggregation assays, confocal laser scanning microscopy, and flow cytometry to gain insights into FIT. We found that at a certain concentration, Fondaparinux formed sufficient large and stable complexes with PF4 that facilitated binding of the HIT-like monoclonal KKO antibody and enhanced platelet aggregation and activation. We proposed a model to describe the role of Fondaparinux concentration in the formation of complexes with platelet factor 4 and how it promotes the binding of KKO. Our results clarify controversial observations of FIT in patients as each contains a dissimilar PF4:Fondaparinux concentration ratio.



https://doi.org/10.1021/acs.bioconjchem.2c00316
Chen, Li-Yu; Schirmer, Uwe; Widder, Miriam; Gruel, Yves; Rollin, Jérôme; Zipfel, Peter F.; Nguyen, Thi-Huong
Breast cancer cell-based ELISA: a potential material for better detection of heparin-induced thrombocytopenia antibodies. - In: Journal of materials chemistry, ISSN 2050-7518, Bd. 10 (2022), 38, S. 7708-7716

Heparin-induced thrombocytopenia (HIT) is caused by newly formed platelet-activating antibodies against complexes formed between platelet factor 4 (PF4) and heparin (H). HIT can result in life-threatening complications; thus, early detection of HIT antibodies is crucial for the treatment of the disease. The enzyme-linked immune absorbance assay (ELISA) for the identification of HIT antibodies is widely used in many laboratories, but in general, this test provides only ∼50% accuracy while other methods show multiple limitations. Here, we developed a new cell-based ELISA to improve the detection of HIT antibodies. Instead of immobilizing PF4 or PF4/H complexes directly onto a plate as in the standard ELISA, we added the complexes on breast cancer cells, i.e., cell line MDA-MB-231, and applied the same protocol for antibody detection. Using confocal laser scanning microscopy and flow cytometry for the characterization of bound complexes, we identified two types of HIT-mimicked antibodies (KKO and 1E12), which were able to differentiate from the non-HIT antibody (RTO). PF4-treated MDA-MB-231 cells allowed binding of HIT-mimicked antibodies better than PF4/H complexes. With human sera, the cell-based ELISA allowed better differentiation of clinically relevant from non-clinically relevant HIT antibodies as compared with the standard ELISA. Our findings provide a potential approach that contributes to the development of better assays for the detection of HIT antibodies.



https://doi.org/10.1039/D2TB01228F
Schemberg, Jörg; El Abbassi, Abdelouahad; Lindenbauer, Annerose; Chen, Li-Yu; Grodrian, Andreas; Nakos, Xenia; Apte, Gurunath; Khan, Nida; Kraupner, Alexander; Nguyen, Thi-Huong; Gastrock, Gunter
Synthesis of biocompatible superparamagnetic iron oxide nanoparticles (SPION) under different microfluidic regimes. - In: ACS applied materials & interfaces, ISSN 1944-8252, Bd. 14 (2022), 42, S. 48011-48028

Superparamagnetic iron oxide nanoparticles (SPION) have a great potential in both diagnostic and therapeutic applications as they provide contrast in magnetic resonance imaging techniques and allow magnetic hyperthermia and drug delivery. Though various types of SPION are commercially available, efforts to improve the quality of SPION are highly in demand. Here, we describe a strategy for optimization of SPION synthesis under microfluidics using the coprecipitation approach. Synthesis parameters such as temperature, pH, iron salt concentration, and coating materials were investigated in continuous and segmented flows. Continuous flow allowed synthesizing particles of a smaller size and higher stability than segmented flow, while both conditions improved the quality of particles compared to batch synthesis. The most stable particles were obtained at a synthesis condition of 6.5 M NH4OH base, iron salt (Fe2+/Fe3+) concentration ratio of 4.3/8.6, carboxymethyl dextran coating of 20 mg/mL, and temperature of 70 ˚C. The synthesized SPION exhibited a good efficiency in labeling of human platelets and did not impair cells. Our study under flow conditions provides an optimal protocol for the synthesis of better and biocompatible SPION that contributes to the development of nanoparticles for medical applications.



https://doi.org/10.1021/acsami.2c13156
Berganza, Eider; Apte, Gurunath; Vasantham, Srivatsan K.; Nguyen, Thi-Huong; Hirtz, Michael Manfred
Integration of biofunctional molecules into 3D-printed polymeric micro-/nanostructures. - In: Polymers, ISSN 2073-4360, Bd. 14 (2022), 7, 1327, S. 1-12

Three-dimensional printing at the micro-/nanoscale represents a new challenge in research and development to achieve direct printing down to nanometre-sized objects. Here, FluidFM, a combination of microfluidics with atomic force microscopy, offers attractive options to fabricate hierarchical polymer structures at different scales. However, little is known about the effect of the substrate on the printed structures and the integration of (bio)functional groups into the polymer inks. In this study, we printed micro-/nanostructures on surfaces with different wetting properties, and integrated molecules with different functional groups (rhodamine as a fluorescent label and biotin as a binding tag for proteins) into the base polymer ink. The substrate wetting properties strongly affected the printing results, in that the lateral feature sizes increased with increasing substrate hydrophilicity. Overall, ink modification only caused minor changes in the stiffness of the printed structures. This shows the generality of the approach, as significant changes in the mechanical properties on chemical functionalization could be confounders in bioapplications. The retained functionality of the obtained structures after UV curing was demonstrated by selective binding of streptavidin to the printed structures. The ability to incorporate binding tags to achieve specific interactions between relevant proteins and the fabricated micro-/nanostructures, without compromising the mechanical properties, paves a way for numerous bio and sensing applications. Additional flexibility is obtained by tuning the substrate properties for feature size control, and the option to obtain functionalized printed structures without post-processing procedures will contribute to the development of 3D printing for biological applications, using FluidFM and similar dispensing techniques.



https://doi.org/10.3390/polym14071327
Xie, Ting; Köhler, Michael; Heyder, Stefan; Günther, Mike; Cao-Riehmer, Jialan
Microfluidically-assisted isolation and characterization of Achromobacter spanius from soils for microbial degradation of synthetic polymers and organic solvents. - In: Environments, ISSN 2076-3298, Bd. 9 (2022), 12, 147, S. 1-17

A micro segmented-flow approach was utilized for the isolation soil bacteria that can degrade synthetic polymers as polyethylene glycols (PEG) and polyacrylamide (PAM). We had been able to obtain many strains; among them, five Achromobacter spanius strains from soil samples of specific sampling sites that were connected with ancient human impacts. In addition to the characterization of community responses and isolating single strains, this microfluidic approach allowed for investigation of the susceptibility of Achromobacter spanius strains against three synthetic polymers, including PEG, PAM, and Polyvinylpyrrolidone (PVP) and two organic solvents known as 1,4-dioxane and diglyme. The small stepwise variation of effector concentrations in 500 nL droplets provides a detailed reflection of the concentration-dependent response of bacterial growth and endogenous autofluorescence activity. As a result, all five strains can use PEG600 as carbon source. Furthermore, all strains showed similar dose-response characteristics in 1,4-dioxane and diglyme. However, significantly different PAM- and PVP-tolerances were found for these strains. Samples from the surface soil of prehistorical rampart areas supplied a strain capable of degradation of PEG, PVP, and PAM. This study demonstrates on the one hand, the potential of microsegment flow for miniaturized dose-response screening studies and its ability to detect novel strains, and on the other hand, two of five isolated Achromobacter spanius strains may be useful in providing optimal growth conditions in bioremediation and biodegradation processes.



https://doi.org/10.3390/environments9120147
Geitner, Robert;
Physikalische Chemie : Trendbericht. - In: Nachrichten aus der Chemie, ISSN 1868-0054, Bd. 70 (2022), 5, S. 64-67

Die Aufklärung von Reaktionsmechanismen ist in der Katalyse wichtig, um die geschwindigkeitsbegrenzende Schritte zu verstehen und zu beschleunigen. Mit maschinellem Lernen lassen dann sich auf Basis der Mechanismen neue Katalysatoren entwickeln. Photochemische Umsetzungen in weichen Membranen folgen einer anderen Kinetik als Reaktionen in Lösung. Mikroschwimmer, Mikromotoren oder Phototaxis zählen zu aktiver Materie. Sie wandeln kontinuierlich Energie aus ihrer Umgebung um und bewegen sich autonom.



https://doi.org/10.1002/nadc.20224122539
Prylutskyy, Yuriy; Nozdrenko, Dmytro; Gonchar, Olga; Prylutska, Svitlana; Bogutska, Kateryna; Franskevych, Daria; Hromovyk, Bohdan; Scharff, Peter; Ritter, Uwe
C60 fullerene attenuates muscle force reduction in a rat during fatigue development. - In: Heliyon, ISSN 2405-8440, Bd. 8 (2022), 12, e12449, S. 1-9

C60 fullerene (C60) as a nanocarbon particle, compatible with biological structures, capable of penetrating through cell membranes and effectively scavenging free radicals, is widely used in biomedicine. A protective effect of C60 on the biomechanics of fast (m. gastrocnemius) and slow (m. soleus) muscle contraction in rats and the pro- and antioxidant balance of muscle tissue during the development of muscle fatigue was studied compared to the same effect of the known antioxidant N-acetylcysteine (NAC). C60 and NAC were administered intraperitoneally at doses of 1 and 150 mg kg−1, respectively, daily for 5 days and 1 h before the start of the experiment. The following quantitative markers of muscle fatigue were used: the force of muscle contraction, the level of accumulation of secondary products of lipid peroxidation (TBARS) and the oxygen metabolite H2O2, the activity of first-line antioxidant defense enzymes (superoxide dismutase (SOD) and catalase (CAT)), and the condition of the glutathione system (reduced glutathione (GSH) content and the activity of the glutathione peroxidase (GPx) enzyme). The analysis of the muscle contraction force dynamics in rats against the background of induced muscle fatigue showed, that the effect of C60, 1 h after drug administration, was (15-17)% more effective on fast muscles than on slow muscles. A further slight increase in the effect of C60 was revealed after 2 h of drug injection, (7-9)% in the case of m. gastrocnemius and (5-6)% in the case of m. soleus. An increase in the effect of using C60 occurred within 4 days (the difference between 4 and 5 days did not exceed (3-5)%) and exceeded the effect of NAC by (32-34)%. The analysis of biochemical parameters in rat muscle tissues showed that long-term application of C60 contributed to their decrease by (10-30)% and (5-20)% in fast and slow muscles, respectively, on the 5th day of the experiment. At the same time, the protective effect of C60 was higher compared to NAC by (28-44)%. The obtained results indicate the prospect of using C60 as a potential protective nano agent to improve the efficiency of skeletal muscle function by modifying the reactive oxygen species-dependent mechanisms that play an important role in the processes of muscle fatigue development.



https://doi.org/10.1016/j.heliyon.2022.e12449
Khan, Nida Zaman; Martin, Daniel; Pliquett, Uwe; Zaikou, Yahor; Thomas, Nacke; Heinrich, Doris; Köhler, Michael; Nguyen, Thi-Huong
High-frequency contactless sensor for the detection of heparin-induced thrombocytopenia antibodies via platelet aggregation. - In: International journal of molecular sciences, ISSN 1422-0067, Bd. 23 (2022), 22, 14395, S. 1-13

Heparin-induced thrombocytopenia (HIT), a severe autoimmune disorder, occurs in patients undergoing heparin therapy. The presence of platelet-activating antibodies against platelet factor 4/Heparin in the blood confirms patients suffering from HIT. The most widely used methods for HIT diagnosis are immunoassays but the results only suit to rule out HIT as the assays provide only around 50% specificity. To confirm HIT, samples with positive results in immunoassays are retested in functional assays (>98% specificity) that track platelet-activating antibodies via platelet aggregation. However, the protocols in functional assays are either time-consuming (due to the requirement of the detection of serotonin release) or require highly trained staff for the visualization of platelets. Here, we applied a cheap and easy-to-use contactless sensor, which employs high-frequency microwaves to detect the changes in the resonant frequency caused by platelet aggregation/activation. Analysis of change in conductivity and permittivity allowed us to distinguish between HIT-like (KKO) and non-HIT-like (RTO) antibodies. KKO caused a stronger reduction of conductivity of platelet samples than RTO. Our results imply that the high-frequency contactless sensor can be a promising approach for the development of a better and easier method for the detection of HIT.



https://doi.org/10.3390/ijms232214395
Grebinyk, Anna; Prylutska, Svitlana; Grebinyk, Sergii; Ponomarenko, Stanislav; Virych, Pavlo; Chumachenko, Vasyl; Kutsevol, Nataliya; Prylutskyy, Yuriy; Ritter, Uwe; Frohme, Marcus
Drug delivery with a pH-sensitive star-like dextran-graft polyacrylamide copolymer. - In: Nanoscale advances, ISSN 2516-0230, Bd. 4 (2022), 23, S. 5077-5088

The development of precision cancer medicine relies on novel formulation strategies for targeted drug delivery to increase the therapeutic outcome. Biocompatible polymer nanoparticles, namely dextran-graft-polyacrylamide (D-g-PAA) copolymers, represent one of the innovative non-invasive approaches for drug delivery applications in cancer therapy. In this study, the star-like D-g-PAA copolymer in anionic form (D-g-PAAan) was developed for pH-triggered targeted drug delivery of the common chemotherapeutic drugs - doxorubicin (Dox) and cisplatin (Cis). The initial D-g-PAA copolymer was synthesized by the radical graft polymerization method, and then alkaline-hydrolyzed to get this polymer in anionic form for further use for drug encapsulation. The acidification of the buffer promoted the release of loaded drugs. D-g-PAAan nanoparticles increased the toxic potential of the drugs against human and mouse lung carcinoma cells (A549 and LLC), but not against normal human lung cells (HEL299). The drug-loaded D-g-PAAan-nanoparticles promoted further oxidative stress and apoptosis induction in LLC cells. D-g-PAAan-nanoparticles improved Dox accumulation and drugs’ toxicity in a 3D LLC multi-cellular spheroid model. The data obtained indicate that the strategy of chemotherapeutic drug encapsulation within the branched D-g-PAAan nanoparticle allows not only to realize pH-triggered drug release but also to potentiate its cytotoxic, prooxidant and proapoptotic effects against lung carcinoma cells.



https://doi.org/10.1039/D2NA00353H
Richter, Felix; Chen, Minqian; Schaub, Patrick; Wüst, Florian; Zhang, Di; Schneider, Steffen; Groß, Gregor Alexander; Mäder, Patrick; Dovzhenko, Oleksandr; Palme, Klaus; Köhler, Michael; Cao-Riehmer, Jialan
Induction of embryogenic development in haploid microspore stem cells in droplet-based microfluidics. - In: Lab on a chip, ISSN 1473-0189, Bd. 22 (2022), 22, S. 4292-4305

This work presents the application of droplet-based microfluidics for the cultivation of microspores from Brassica napus using the doubled haploid technology. Under stress conditions (e.g. heat shock) or by chemical induction a certain fraction of the microspores can be reprogrammed and androgenesis can be induced. This process is an important approach for plant breeding because desired plant properties can be anchored in the germline on a genetic level. However, the reprogramming rate of the microspores is generally very low, increasing it by specific stimulation is, therefore, both a necessary and challenging task. In order to accelerate the optimisation and development process, the application of droplet-based microfluidics can be a promising tool. Here, we used a tube-based microfluidic system for the generation and cultivation of microspores inside nL-droplets. Different factors like cell density, tube material and heat shock conditions were investigated to improve the yield of vital plant organoids. Evaluation and analysis of the stimuli response were done on an image base aided by an artificial intelligence cell detection algorithm. Droplet-based microfluidics allowed us to apply large concentration programs in small test volumes and to screen the best conditions for reprogramming cells by the histone deacetylase inhibitor trichostatin A and for enhancing the yield of vital microspores in droplets. An enhanced reprogramming rate was found under the heat shock conditions at 32 &ring;C for about 3 to 6 days. In addition, the comparative experiment with MTP showed that droplet cultivation with lower cell density (<10 cells per droplet) or adding media after 3 or 6 days significantly positively affects the microspore growth and embryo rate inside 120 nL droplets. Finally, the developed embryos could be removed from the droplets and further grown into mature plants. Overall, we demonstrated that the droplet-based tube system is suitable for implementation in an automated, miniaturized system to achieve the induction of embryogenic development in haploid microspore stem cells of Brassica napus.



https://doi.org/10.1039/D2LC00788F