Geförderte OA-Publikationen

Pores are intrinsic defects of ceramic composites and influence their functional properties significantly. Their characterization is therefore a pivotal task in material and process optimization. It is demonstrated that polished section analysis allows for obtaining precise information on pore size, shape, area fraction, and homogeneous distribution. It is proven that laser scanning microscopy provides accurate height maps and is thus an appropriate technique for assessing surface features. Such data is used to compare areas with good and poor polishing results, and various surface parameters are evaluated in terms of their informative value and data processing effort. The material under investigation is a low temperature co-fired ceramic composite. Through statistical analysis of the data, the inclination angle was identified as an appropriate parameter to describe the polishing result. By using masked data, direct conclusions can be drawn about the leveling of load-bearing surface areas, which are crucial in photolithographic processing steps and bonding technology. A broad discussion of different defects based on the results contributes to a critical analysis of the potentials and obstacles of micromachining of low temperature cofired ceramic substrates.

C60 fullerene (C60) as a nanocarbon particle, compatible with biological structures, capable of penetrating through cell membranes and effectively scavenging free radicals, is widely used in biomedicine. A protective effect of C60 on the biomechanics of fast (m. gastrocnemius) and slow (m. soleus) muscle contraction in rats and the pro- and antioxidant balance of muscle tissue during the development of muscle fatigue was studied compared to the same effect of the known antioxidant N-acetylcysteine (NAC). C60 and NAC were administered intraperitoneally at doses of 1 and 150 mg kg−1, respectively, daily for 5 days and 1 h before the start of the experiment. The following quantitative markers of muscle fatigue were used: the force of muscle contraction, the level of accumulation of secondary products of lipid peroxidation (TBARS) and the oxygen metabolite H2O2, the activity of first-line antioxidant defense enzymes (superoxide dismutase (SOD) and catalase (CAT)), and the condition of the glutathione system (reduced glutathione (GSH) content and the activity of the glutathione peroxidase (GPx) enzyme). The analysis of the muscle contraction force dynamics in rats against the background of induced muscle fatigue showed, that the effect of C60, 1 h after drug administration, was (15-17)% more effective on fast muscles than on slow muscles. A further slight increase in the effect of C60 was revealed after 2 h of drug injection, (7-9)% in the case of m. gastrocnemius and (5-6)% in the case of m. soleus. An increase in the effect of using C60 occurred within 4 days (the difference between 4 and 5 days did not exceed (3-5)%) and exceeded the effect of NAC by (32-34)%. The analysis of biochemical parameters in rat muscle tissues showed that long-term application of C60 contributed to their decrease by (10-30)% and (5-20)% in fast and slow muscles, respectively, on the 5th day of the experiment. At the same time, the protective effect of C60 was higher compared to NAC by (28-44)%. The obtained results indicate the prospect of using C60 as a potential protective nano agent to improve the efficiency of skeletal muscle function by modifying the reactive oxygen species-dependent mechanisms that play an important role in the processes of muscle fatigue development.

During the impregnation of reinforcement fabrics in liquid composite molding processes, the flow within fiber bundles and the channels between the fiber bundles usually advances at different velocities. This so-called “dual-scale flow” results in void formation inside the composite material and has a negative effect on its mechanical properties. Semi-empirical models can be applied to calculate the extent of the dual-scale flow. In this study, a methodology is presented that stops the impregnation of reinforcement fabrics at different filling levels by using a photo-reactive resin system. By means of optical evaluation, the theoretical calculation models of the dual-scale flow are validated metrologically. The results show increasingly distinct dual-scale flow effects with increasing pressure gradients. The methodology enables the measurability of microscopic differences in flow front progression to validate renowned theoretical models and compare simulations to measurements of applied injection processes.

Magnetorheological fluid (MR) based dampers have been established as an alternative to classical hydraulic dampers with proportional electromagnetic valves under vibration processes which demand adaptive damping forces. Almost all MR-dampers are spatially 1-Degree-of-Freedom (DOF) dampers, having only one axis or direction of damping force generation. In many technical applications there exist movements in more than one spatial DOF, eventually necessitating more than one damper. Because of this, the damping is required not only in one but in more spatial directions, yet adjustable. In this work, a new design of a spatial 3DOF MR damper is proposed to allow damping in three directions within one damping device. The underlying motivation is to spatially integrate three damping directions in one device to potentially reduce installation space compared to three separate 1 DOF dampers. The basic idea of the construction is to use one fluid chamber with several spatially distributed control elements at different positions of the fluid chamber. The control elements are electromagnets, generating the magnetic field in the fluid at different positions so that in total 3 spatial DOFs can be damped individually. Experiments and investigation are made, where the damper's behavior are analyzed not only in one single DOF but also in more than one DOF. It is shown, that the damping concept can generate damping in all three spatial DOFs, both individually or together. Moreover, the damping can be generated to be dominant in one specific direction, meanwhile minimum in the other direction orthogonal to it.

The prediction of turbulent flow by the application of machine learning (ML) algorithms to big data is a concept currently in its infancy which requires further development. It is of special importance if the aim is a prediction that is good in a statistical sense or if the vector fields should be predicted as good as possible. For this purpose, the statistical and deterministic prediction of the unsteady but periodic flow of the von Kármán Vortex Street (KVS) was examined using an Echo State Network (ESN) which is well suited for learning from time series due to its recurrent connections. The experimental data of the velocity field of the KVS were collected by Particle Image Velocimetry (PIV). Then, the data were reduced by Proper Orthogonal Decomposition (POD) and the flow was reconstructed by the first hundred most energetic modes. An ESN with 3000 neurons was optimized with respect to its three main hyperparameters to predict the time coefficients of the POD modes. For the deterministic prediction, the aim was to maximize the correct direction of the vertical velocities. The results indicate that the ESN can mimic the periodicity and the unsteadiness of the flow. It is also able to predict the sequence of the upward and downward directed velocities for longer time spans. For the statistical prediction, the similarity of the probability density functions of the vertical velocity fields between the predicted and actual flow was achieved. The leaking rate of the ESN played a key role in the transition from deterministic to statistical predictions.