http://www.tu-ilmenau.de

Logo TU Ilmenau


Fachgebiet Elektrochemie und Galvanotechnik


headerphoto Fachgebiet Elektrochemie und Galvanotechnik
Ansprechpartner

Univ.-Prof. Dr. Andreas Bund

Fachgebietsleiter

Telefon +49 3677 69-3107

INHALTE

Publikationen

Anzahl der Treffer: 342
Erstellt: Tue, 17 Oct 2017 23:01:25 +0200 in 0.0142 sec


Stich, Michael; Pandey, Nisrit; Bund, Andreas
Drying and moisture resorption behaviour of various electrode materials and separators for lithium-ion batteries. - In: Journal of power sources : the international journal on the science and technology of electrochemical energy systems. - New York, NY [u.a.] : Elsevier, ISSN 18732755, Bd. 364 (2017), S. 84-81
https://doi.org/10.1016/j.jpowsour.2017.08.009
Ispas, Adriana; Wolff, Elisabeth; Bund, Andreas
An electrochemical quartz crystal microbalance study on electrodeposition of aluminum and aluminum-manganese alloys. - In: Journal of the Electrochemical Society : JES. - Pennington, NJ : Electrochemical Soc, ISSN 19457111, Bd. 164Bd. 164 (2017), 8, Seite H5263-H5270
https://doi.org/10.1149/2.0381708jes
Weier, Tom; Bund, Andreas; El-Mofid, Wassima; Horstmann, Gerrit Maik; Lalau, Cornel-Constantin; Landgraf, Steffen; Nimtz, Michael; Starace, Marco; Stefani, Frank; Weber, Norbert
Liquid metal batteries - materials selection and fluid dynamics. - In: Final LIMTECH Colloquium and International Symposium on Liquid Metal Technologies : 19-20 September 2017, Dresden, Germany. - [Bristol] : IOP Publishing / Final LIMTECH Colloquium and International Symposium on Liquid Metal Technologies (Dresden) : 2017.09.19-20., (2017), S. 012013, insges. 14 S.
https://doi.org/10.1088/1757-899X/228/1/012013
Jehl, Pierre; Halbedel, Bernd; Lerp, Marianne; Schmidt, Udo; Teichert, Gerd; Schlütter, Frank
Entrapment of hard particles into Cr(VI)-free conversion layers of electrodeposited zinc coatings to improve corrosion resistance. - In: 21st Symposium on Composites. - [Zurich] : Trans Tech Publications / Symposium on Composites ; 21 (Bremen) : 2017.07.05-07., ISBN 978-3-0357-3198-9, (2017), S. 434-439

Due to the restriction of passive layers containing Cr6+ [1], which were characterized by excellent corrosion protection due to their self-healing effect for scratches on metal surfaces, current corrosion protection systems consist of chromium (III) -containing thick layer passivation. Due to their lower hardness, current corrosion protection systems are susceptible to mechanical stress. This is particularly critical at barrel plating of screws, rivets etc. where the manufacturing process leads to damages of the corrosion protection layer and consequently to reduced corrosion resistance. To counter this problem, we point out one approach to install hard particles into the passivation layer. The entrapment of the hard particles into the passivation is detected by Glow Discharge Optical Emission Spectrometry. Comparative investigations in the corrosion chamber prove the improvement of the corrosion protection of steel parts with passivation layers containing hard particles.


https://doi.org/10.4028/www.scientific.net/KEM.742.434
Grätz, Olga; Raguzin, Ivan; Zech, Claudia; Ivanov, Svetlozar; Beckhoff, Burkhard; Stamm, Manfred
Analysis and improvement of high energy Li-S battery systems. - In: DPG-Frühjahrstagung (DPG Spring Meeting) of the Condensed Matter Section (SKM)DPG-Frühjahrstagung (DPG Spring Meeting) of the Condensed Matter Section (SKM) : 19-24 March 2017, Technical University of Dresden. - Bad Honnef : Deutsche Physikalische Gesellschaft / DPG-Frühjahrstagung (Dresden) : 2017.03.19-24. - Bad Honnef : Deutsche Physikalische Gesellschaft, (2017), O 15.1, insges. 1 S.
Grieseler, Rolf; Camargo, Magali K.; Hopfeld, Marcus; Schmidt, Udo; Bund, Andreas; Schaaf, Peter
Copper-MAX-phase composite coatings obtained by electro-co-deposition: a promising material for electrical contacts. - In: Surface and coatings technology. - Amsterdam [u.a.] : Elsevier Science, ISSN 02578972, Bd. 321 (2017), S. 219-228
https://doi.org/10.1016/j.surfcoat.2017.04.060
Dyck, Tobias
Untersuchung von beschichteten Kontaktgeometrien für Steckverbinder. - In: GalvanotechnikGalvanotechnik : älteste Fachzeitschrift für die Praxis der Oberflächentechnik. - Bad Saulgau : Leuze : älteste Fachzeitschrift für die Praxis der Oberflächentechnik ; mit Nachrichten der Deutschen Gesellschaft für Galvano- und Oberflächentechnik und der Österreichischen Gesellschaft für Oberflächentechnik. - Saulgau, Württ : Leuze, ISSN 00164232, Bd. 108 (2017), 4, S. 660-665
Dyck, Tobias; Bund, Andreas
Auslegung von Kontaktsystemen mit galvanischen Zinnschichten unter Berücksichtigung der elektrischen und tribologischen Eigenschaften. - In: Elektrische und optische Verbindungstechnik 2017 / Symposium Connectors ; 6 (Lemgo) : 2017.03.15-16. : Tagungsband der GMM-Fachtagung : 6. Symposium Connectors. - Lemgo : Labor für Feinsystemtechnik, Hochschule Ostwestfalen-Lippe, ISBN 978-3-00-055212-0, (2017), S. 129-146

Gligor, Delia; Cuibus, Florina; Peipmann, Ralf; Bund, Andreas
Novel amperometric sensors for nitrite detection using electrodes modified with PEDOT prepared in ionic liquids. - In: Journal of solid state electrochemistry : current research and development in science and technology. - Berlin : Springer, ISSN 14330768, Bd. 21 (2017), 1, S. 281-290
http://dx.doi.org/10.1007/s10008-016-3368-3
Sauerteig, Danile; Ivanov, Svetlozar; Reinshagen, Holger; Bund, Andreas
Reversible and irreversible dilation of lithium-ion battery electrodes investigated by in-situ dilatometry. - In: Journal of power sources : the international journal on the science and technology of electrochemical energy systems. - New York, NY [u.a.] : Elsevier, ISSN 18732755, Bd. 342 (2017), S. 939-946
http://dx.doi.org/10.1016/j.jpowsour.2016.12.121