An electrochemical quartz crystal microbalance study on electrodeposition of aluminum and aluminum-manganese alloys. - In: Journal of the Electrochemical Society, ISSN 1945-7111, Bd. 164 (2017), 8, Seite H5263-H5270
https://doi.org/10.1149/2.0381708jes
Liquid metal batteries - materials selection and fluid dynamics. - In: Final LIMTECH Colloquium and International Symposium on Liquid Metal Technologies, (2017), S. 012013, insges. 14 S.
https://doi.org/10.1088/1757-899X/228/1/012013
Entrapment of hard particles into Cr(VI)-free conversion layers of electrodeposited zinc coatings to improve corrosion resistance. - In: 21st Symposium on Composites, (2017), S. 434-439
Due to the restriction of passive layers containing Cr6+ [1], which were characterized by excellent corrosion protection due to their self-healing effect for scratches on metal surfaces, current corrosion protection systems consist of chromium (III) -containing thick layer passivation. Due to their lower hardness, current corrosion protection systems are susceptible to mechanical stress. This is particularly critical at barrel plating of screws, rivets etc. where the manufacturing process leads to damages of the corrosion protection layer and consequently to reduced corrosion resistance. To counter this problem, we point out one approach to install hard particles into the passivation layer. The entrapment of the hard particles into the passivation is detected by Glow Discharge Optical Emission Spectrometry. Comparative investigations in the corrosion chamber prove the improvement of the corrosion protection of steel parts with passivation layers containing hard particles.
https://doi.org/10.4028/www.scientific.net/KEM.742.434
Analysis and improvement of high energy Li-S battery systems. - In: DPG-Frühjahrstagung (DPG Spring Meeting) of the Condensed Matter Section (SKM), (2017), O 15.1
Abweichende Verfasserangabe: Claudia Zech, Olga Grätz, Ivan Raguzin, Svetlozar Ivanov, Markus Börner, Marco Evertz, Marcelina Pyschik, Daniel Grötzsch, Wolfgang Malzer, Manfred Stamm, Sascha Nowak, and Burkhard Beckhoff
Copper-MAX-phase composite coatings obtained by electro-co-deposition: a promising material for electrical contacts. - In: Surface and coatings technology, ISSN 1879-3347, Bd. 321 (2017), S. 219-228
https://doi.org/10.1016/j.surfcoat.2017.04.060
Untersuchung von beschichteten Kontaktgeometrien für Steckverbinder. - In: Galvanotechnik, ISSN 0016-4232, Bd. 108 (2017), 4, S. 660-665
Auslegung von Kontaktsystemen mit galvanischen Zinnschichten unter Berücksichtigung der elektrischen und tribologischen Eigenschaften. - In: Elektrische und optische Verbindungstechnik 2017, (2017), S. 129-146
Bestimmung von Presskräften mittels Ultraschall : (Impuls-Echo-Verfahren). - In: ZfP-Zeitung, ISSN 1616-069X, Bd. 153 (2017), S. 33-35
Novel amperometric sensors for nitrite detection using electrodes modified with PEDOT prepared in ionic liquids. - In: Journal of solid state electrochemistry, ISSN 1433-0768, Bd. 21 (2017), 1, S. 281-290
http://dx.doi.org/10.1007/s10008-016-3368-3
Reversible and irreversible dilation of lithium-ion battery electrodes investigated by in-situ dilatometry. - In: Journal of power sources, ISSN 1873-2755, Bd. 342 (2017), S. 939-946
http://dx.doi.org/10.1016/j.jpowsour.2016.12.121