A vertically positionable permanent magnet system for the Planck-Balance. - In: SMSI 2023 Conference - Sensor and Measurement Science International, (2023), S. 131-132
The Planck-Balance is a compact version of a Kibble balance, allowing a direct measurement of mass by means of electromagnetic force compensation (EMFC). This means that the effects of deformation have to be considered. The vertical position adjustment of the coil, which is discussed in this article, can reduce many errors, such as errors due to deformations during weighing, which lead to a non-proportional correlation between the current in the compensation coil and the compensated mass. In our setup, these errors can be up to about 8 ppm in the maximum case. In addition, there are other problems such as higher order harmonics in the velocity mode, which can be reduced.
https://doi.org/10.5162/SMSI2023/B6.4
Modelling in measurement - from classical analytical approaches to cognitive data-driven solutions. - In: SMSI 2023 Conference - Sensor and Measurement Science International, (2023), S. 209-210
Models are an inseparable part of Metrology. They make it possible to derive measurement results, including measurement uncertainties, from measurement data or output signals and knowledge about the measurement process. Models establish a functional relationship between the measurand and all relevant quantities on which the measurand depends. Models do not necessarily have to be derived from analytical-functional relationships; they are increasingly data-driven with cognitive capabilities. In general, they are used to design measurement systems, analyze measurement data, make inferences and predictions, and form the basis for evaluating measurement uncertainties.
https://doi.org/10.5162/SMSI2023/D2.3
Current advances in 3D tip- and laser-based nanofabrication in extended working areas. - In: SMSI 2023 Conference - Sensor and Measurement Science International, (2023), S. 245-246
Nanotechnology is affecting almost all areas of life, from semiconductor industry to optics, medicine and agriculture. Classical methods for sensing, measuring and fabricating on the nanoscale are faced with new challenges: features are getting smaller and the variety of structures and materials is increasing. Thus, many new techniques are developed in this field. Research at the Technische Universität Ilmenau aims to support transferring these new technologies to industrial scale for future application. The focus is on tip- and laser-based processes together with devices for nanometer positioning.
https://doi.org/10.5162/SMSI2023/D6.4
Actuator design considerations for the Planck-Balance. - In: SMSI 2023 Conference - Sensor and Measurement Science International, (2023), S. 129-130
The paper presents crucial design considerations for the actuators in a table-top Kibble balance, especially its influence on the uncertainty contribution by the voltage measurements. The resulting contribution is exemplary shown for the PB2 version of the Planck-Balance and constraints are discussed that limit the possibilities to optimize the geometric factor of the measurement actuator.
https://doi.org/10.5162/SMSI2023/B6.3
Characterization of micro spheres through AFM surface scans. - In: Proceedings of the 23rd International Conference of the European Society for Precision Engineering and Nanotechnology, (2023), S. 385-388
Measurement errors in the Planck-Balance caused by alternating forces. - In: Proceedings of the 23rd International Conference of the European Society for Precision Engineering and Nanotechnology, (2023), S. 343-346
Investigating the kinematic performance of a positioning device with subatomic resolution. - In: Proceedings of the 23rd International Conference of the European Society for Precision Engineering and Nanotechnology, (2023), S. 51-54
Evaluation of hysteresis response in achiral edges of graphene nanoribbons on semi-insulating SiC. - In: Materials science forum, ISSN 1662-9752, Bd. 1089 (2023), S. 15-22
Hysteresis response of epitaxially grown graphene nanoribbons devices on semi-insulating 4H-SiC in the armchair and zigzag directions is evaluated and studied. The influence of the orientation of fabrication and dimensions of graphene nanoribbons on the hysteresis effect reveals the metallic and semiconducting nature graphene nanoribbons. The hysteresis response of armchair based graphene nanoribbon side gate and top gated devices implies the influence of gate field electric strength and the contribution of surface traps, adsorbents, and initial defects on graphene as the primary sources of hysteresis. Additionally, passivation with AlOx and top gate modulation decreased the hysteresis and improved the current-voltage characteristics.
https://doi.org/10.4028/p-i2s1cm
SI traceable small force generation and measurements via photon momentum. - In: SMSI 2023 Conference - Sensor and Measurement Science International, (2023), S. 133-134
In this contribution we present the concept of photon momentum enabled SI-traceably made small force generation and measurements below the conventionally accepted limits. The developed instrumentations, the measurement infrastructure and the obtained results demonstrate the advantages of this concept and further are extended to present the means of systematization of the force measurements covering the range below 10 μN to several tens of nN. The prospects to reduce the relative measurement uncertainties of small force and small weight measurements are discussed.
https://dx.doi.org/10.5162/SMSI2023/B7.1
Permanent tracebility of a nanopositioning and nanomeasuring machine. - In: 2023 ASPE Winter Topical Meeting: Precision Optical Metrology Workshop, (2023), S. 82-86
Due to the frequency stabilization of He-Ne-lasers directly to a frequency comb controlled by a GPS atomic clock disciplined oscillator and their direct coupling with a Nanopositioning and Nanomeasuring Machine, directly traceable measurements are demonstrated.