Gesamtliste aus der Hochschulbibliographie

Anzahl der Treffer: 492
Erstellt: Fri, 26 Apr 2024 23:21:36 +0200 in 0.0406 sec


Kuznietsova, Halyna; Dziubenko, Natalia; Herheliuk, Tetiana; Prylutskyy, Yuriy; Täuscher, Eric; Ritter, Uwe; Scharff, Peter
Water-soluble pristine C60 fullerene inhibits liver alterations associated with hepatocellular carcinoma in rat. - In: Pharmaceutics, ISSN 1999-4923, Bd. 12 (2020), 9, 794, S. 1-20
Richtiger Name des Verfassers: Eric Täuscher

https://doi.org/10.3390/pharmaceutics12090794
Schweitzer, Dietrich; Haueisen, Jens; Brauer, Jakob Lauritz; Hammer, Martin; Klemm, Matthias
Comparison of algorithms to suppress artifacts from the natural lens in fluorescence lifetime imaging ophthalmoscopy (FLIO). - In: Biomedical optics express, ISSN 2156-7085, Bd. 11 (2020), 10, S. 5586-5602

https://doi.org/10.1364/BOE.400059
Schricker, Klaus; Ganß, Martin; Könke, Carsten; Bergmann, Jean Pierre
Feasibility study of using integrated fiber optical sensors to monitor laser-assisted metal-polymer joining. - In: Welding in the world, ISSN 1878-6669, Bd. 64 (2020), 9, S. 1565-1578

The possibilities and challenges of using fiber optical sensors to monitor the laser-assisted joining of metal-polymer joints have been described in this article. Fundamental investigation proves the basic suitability of the measuring method for this application and studies the effect of essential influencing variables of the joining process - e.g., the clamping force - on the resulting sensor signals. In addition, the strain state (because of the process temperature and shrinkage of the polymer) of the parts to be joined can be traced as a function of the joining partners, the process parameters, and the material thicknesses. It is shown that the fiber optical method is suitable for process monitoring directly in the joining zone of metal-polymer hybrids and providing a tool for detailed strain measurements in the joint zone during subsequent component testing.



https://doi.org/10.1007/s40194-020-00942-y
Köhler, Michael; Beetz, Nancy; Günther, Mike; Möller, Frances; Schüler, Tim; Cao-Riehmer, Jialan
Microbial community types and signature-like soil bacterial patterns from fortified prehistoric hills of Thuringia (Germany). - In: Community ecology, ISSN 1588-2756, Bd. 21 (2020), 2, S. 107-120

16S rRNA profiling has been applied for the investigation of bacterial communities of surface soil samples from forest-covered areas of ten prehistorical ramparts from different parts of Thuringia. Besides the majority bacterial types that are present in all samples, there could be identified bacteria that are highly abundant in some places and absent or low abundant in others. These differences are mainly related to the acidity of substrate and distinguish the communities of lime stone hills from soils of sand/quartzite and basalt hills. Minority components of bacterial communities show partially large differences that cannot be explained by the pH of the soil or incidental effects, only. They reflect certain relations between the communities of different places and could be regarded as a kind of signature-like patterns. Such relations had also been found in a comparison of the data from ramparts with formerly studied 16S rRNA profiling from an iron-age burial field. The observations are supporting the idea that a part of the components of bacterial communities from soil samples reflect their ecological history and can be understood as the "ecological memory" of a place. Probably such memory effects can date back to prehistoric times and might assist in future interpretations of archaeological findings on the prehistoric use of a place, on the one hand. On the other hand, the genetic profiling of soils of prehistoric places contributes to the evaluation of anthropogenic effects on the development of local soil bacterial diversity.



https://doi.org/10.1007/s42974-020-00017-4
Halm, Cynthia; Otto, Andreas; Stark, Tilman; Schaaf, Peter
Ultrasonic excitation during press-fit joining of electrical contacts. - In: The international journal of advanced manufacturing technology, ISSN 1433-3015, Bd. 109 (2020), 7/8, S. 2215-2220

https://doi.org/10.1007/s00170-020-05760-6
Budzinski, Oliver; Grebel, Thomas; Wolling, Jens; Zhang, Xijie
Drivers of article processing charges in open access. - In: Scientometrics, ISSN 1588-2861, Bd. 124 (2020), 3, S. 2185-2206

https://doi.org/10.1007/s11192-020-03578-3
Döring, Nicola; Mohseni, Rohangis; Walter, Roberto
Design, use, and effects of sex dolls and sex robots: scoping review. - In: Journal of medical internet research, ISSN 1438-8871, Bd. 22 (2020), 7, e18551, S. 1-28

https://doi.org/10.2196/18551
Bang-Jensen, Jørgen; Bellitto, Thomas; Schweser, Thomas; Stiebitz, Michael
On DP-coloring of digraphs. - In: Journal of graph theory, ISSN 1097-0118, Bd. 95 (2020), 1, S. 76-98

https://doi.org/10.1002/jgt.22535
Jaziri, Nesrine; Boughamoura, Ayda; Müller, Jens; Mezghani, Brahim; Tounsi, Fares; Ismail, Mohammed
A comprehensive review of thermoelectric generators: technologies and common applications. - In: Energy reports, ISSN 2352-4847, Bd. 6 (2020), S. 264-287

https://doi.org/10.1016/j.egyr.2019.12.011