Gesamtliste aus der Hochschulbibliographie

Anzahl der Treffer: 494
Erstellt: Tue, 07 May 2024 23:28:51 +0200 in 0.0710 sec


Henning, Stefan; Linß, Sebastian; Zentner, Lena
detasFLEX - a computational design tool for the analysis of various notch flexure hinges based on non-linear modeling. - In: Mechanical sciences, ISSN 2191-916X, Bd. 9 (2018), 2, S. 389-404

A novel computational design tool to calculate the elasto-kinematic flexure hinge properties is presented. Four hinge contours are implemented. It is shown, that FEM results correlate well with the analytical design tool results. For a given deflection angle of 10˚ and a corner-filleted contour, the deviations of the bending stiffness are between 0.1 % and 9.4 %. The design tool can be beneficial for the accelerated and systematic synthesis of compliant mechanisms with optimized flexure hinges.



https://doi.org/10.5194/ms-9-389-2018
Krug, Silvia; Aumüller, Matthias; Seitz, Jochen
Hybrid scheme to enable DTN routing protocols to efficiently exploit stable MANET contacts. - In: EURASIP journal on wireless communications and networking, ISSN 1687-1499, (2018), 237, S. 1-13

https://doi.org/10.1186/s13638-018-1248-5
Sousa, Marcelo Nogueira de; Thomä, Reiner
Enhancement of localization systems in NLOS urban scenario with multipath ray tracing fingerprints and machine learning. - In: Sensors, ISSN 1424-8220, Bd. 18 (2018), 11, 4073, insges. 30 S.

https://doi.org/10.3390/s18114073
Mattern, Anne; Sandig, Romy; Joos, Alexander; Löwa, Norbert; Kosch, Olaf; Weidner, Andreas; Wells, James; Wiekhorst, Frank; Dutz, Silvio
Magnetic nanoparticle-gel materials for development of joint phantoms for MPI and MRI. - In: International journal on magnetic particle imaging, ISSN 2365-9033, Bd. 4 (2018), 2, 1811001, S. 1-5

https://doi.org/10.18416/ijmpi.2018.1811001
Bartsch, Heike; Peipmann, Ralf; Klett, Maren; Brauer, Dana; Schober, Andreas; Müller, Jens
PEDOT coated thick film electrodes for in situ detection of cell adhesion in cell cultures. - In: Biosensors, ISSN 2079-6374, Bd. 8 (2018), 4, 105, insges. 13 S.

https://doi.org/10.3390/bios8040105
Shirichian, Mehdi; Chamaani, Somayyeh; Akbarpour, Alireza; Del Galdo, Giovanni
Analysis and design of broadband simultaneous wireless information and power transfer (SWIPT) system considering rectifier effect. - In: Energies, ISSN 1996-1073, Bd. 11 (2018), 9, 2387, S. 1-18

https://doi.org/10.3390/en11092387
Steidl, Matthias; Wu, Mingjian; Peh, Katharina; Kleinschmidt, Peter; Spiecker, Erdmann; Hannappel, Thomas
Impact of N incorporation on VLS growth of GaP(N) nanowires utilizing UDMH. - In: Nanoscale research letters, ISSN 1556-276X, Bd. 13 (2018), Article 417, insges. 9 S.

https://doi.org/10.1186/s11671-018-2833-6
Bartsch, Heike; Grieseler, Rolf; Mánuel, Jose; Pezoldt, Jörg; Müller, Jens
Magnetron sputtered AlN layers on LTCC multilayer and silicon substrates. - In: Coatings, ISSN 2079-6412, Bd. 8 (2018), 8, 289, insges. 19 S.

https://doi.org/10.3390/coatings8080289
Rieger, Steffen; Klee, Sascha; Baumgarten, Daniel
Experimental characterization and correlation of Mayer waves in retinal vessel diameter and arterial blood pressure. - In: Frontiers in physiology, ISSN 1664-042X, Bd. 9 (2018), Article 892, insges. 12 S.

https://doi.org/10.3389/fphys.2018.00892
Stegner, Johannes; Gropp, Sebastian; Podoskin, Dmitry; Stehr, Uwe; Hoffmann, Martin; Hein, Matthias
An analytical temperature-dependent design model for contour-mode MEMS resonators and oscillators verified by measurements. - In: Sensors, ISSN 1424-8220, Bd. 18 (2018), 7, 2159, insges. 21 S.

https://doi.org/10.3390/s18072159