The SISO CSPI PDG standard for COTS simulation package interoperability reference models. - Online-Ressource (PDF-Datei: 10 S., 103,2 KB)Druckausg.: SISO European Simulation Interoperability Workshop : EURO SIW 2008, held 16 - 19 June 2008. Edinburgh, Scotland. - Red Hook, NY : Curran, 2008. - S. 118-127. - ISBN 978-1-605-60200-4
Experiences from the application of HLA-based distributed simulations in the production of vehicles. - Online-Ressource (PDF-Datei: 6 S., 281,8 KB)Druckausg.: HMS 2008 : the 11th [i.e. 10th] International Workshop on Harbor Maritime Multimodal Logistics Modeling & Simulation ; September 17 - 19, 2008, Campora S. Giovanni (Amantea, CS), Italy ; [part of the International Mediterranean and Latin American Modeling Multiconference, I3M 2008] / ed. by Agostino Bruzzone ... - Genova : Univ., 2008. - ISBN 978-88-903724-2-1. - S. 29-34
This article discusses the application of distributed simulation in the context of vehicle production planning. The experiences are derived from a real industrial project which aimed at connecting up to seven individually developed simulation models. The article reports on lessons learned which include the need for efficient ways to manage and control HLA-based distributed federations, to maintain a single code base for the models as well as lookahead considerations for synchronization.
Management of HLA-based distributed legacy SLX-models. - In: Winter Simulation Conference, 2008, ISBN 978-1-4244-2707-9, (2008), S. 1086-1093
This article discusses management tasks that have to be supported for an efficient reuse of simulation models within HLA-based distributed simulation environments. After a review of the controversial discussions on the deployment of distributed simulation in the industrial domain, this article derives the need of support for such basic management tasks. Based on the practical experiences from an industrial project from the manufacturing domain, in which several legacy SLX models had to be integrated, we demonstrate how these management tasks have been supported and which tools were needed for this purpose. We furthermore discuss the results of the distributed simulation and show the necessity and the added benefit provided through its usage in industry.
Guidelines for commercial off-the-shelf simulation package interoperability. - In: Winter Simulation Conference, 2008, ISBN 978-1-4244-2707-9, (2008), S. 193-204
Commercial-off-the-shelf (COTS) Simulation Packages (CSPs) are widely used visual interactive modeling environments such as Arena, Anylogic, Flexsim, Simul8, Witness, etc. CSP Interoperability (or distributed simulation) is a technique that allows a simulation to be executed over several computers or for several simulations running on different computers to run together. This also relates to simulation languages such as SLX and GPSS/H. There have been various attempts to interoperate these CSPs, some with the IEEE 1516 High Level Architecture (HLA). These can be quite complex and it is easy to loose track of exactly what is occurring between interoperating CSPs and their models. This paper introduces a set of Interoperability Reference Models (IRMs), or design patters for CSP Interoperability, that can be used as guidelines to simplify the interoperability process.
Future trends in distributed simulation and distributed virtual environments: results of a peer study. - In: Winter Simulation Conference, 2008, ISBN 978-1-4244-2707-9, (2008), S. 777-785
This paper reports main results of a peer study on future trends in distributed simulation and distributed virtual environments. The peer study was based on the opinions of more than 60 experts which were collected by means of a survey and personal interviews. The survey collected opinions concerning the current state-of-the-art, relevance, and research challenges that must be addressed to advance and strengthen these technologies to a level where they are ready to be applied in day-to-day business in industry. Most important result of this study is the observation that as research areas, both distributed simulation and distributed virtual environments are attributed a high future practical relevance and a high economic potential. At the same time the study shows that the current adoption of these technologies in the industrial sector is rather low. The study analyses reasons for this observation and identifies open research challenges.
Agentenbasiertes Scheduling und Rescheduling in Produktions-Transport-Netzwerken. - In: Advances in simulation for production and logistics applications, (2008), S. 299-308
An agent-based approach for supporting production and logistics planning is presented. The focus is not only production schedules but also costs of manufacturing and logistic services. This is achieved through efficient negotiation mechanisms working with additional budget or cost reduction, based on a contracting protocol and the agent infrastructure JADE. Two different strategies are examined for rescheduling jobs to minimize total weighted tardiness. The proposed approach is illustrated in a case study concerning optimisation of a four stage production network in relation to sub-contracted logistic services.
Zukunftstrends in den Bereichen Verteilte Simulation und Verteilte Virtuelle Umgebungen. - In: Advances in simulation for production and logistics applications, (2008), S. 489-498
This paper summarizes the results of a peer study on future trends in distributed simulation and distributed virtual environments initiated by the Fraunhofer IFF. The study is based on the opinions of more than 60 experts which were collected by means of a survey and personal interviews. Most important result of this study is the fact that both distributed simulation and distributed virtual environments as research areas are attributed a high future practical relevance and a high economic potential. At the same time the study shows that the current adoption of the technologies in the industrial sector is rather low. The study also analyses reasons for this observation and identifies open research challenges in these areas.
Erfahrungen aus der Anwendung von HLA-basierter verteilter Simulation im Nutzfahrzeugbereich. - In: Advances in simulation for production and logistics applications, (2008), S. 499-508
Distributed simulation has been known for many years as a method for the simulation of complex models. This paper presents the author's experiences from an industrial project targeting distributed simulation in the utility vehicles sector production. Existing monolithic simulation models were extended for their reuse in a distributed environment. One project requirement was to ensure the consistency between monolithic and distributed model versions. Project results show that the frequently mentioned concerns regarding distributed simulation can be resolved successfully in industrial contexts. The gathered results of distributed simulations legitimate the necessary efforts.
Clarifying interoperability: the SISO CSPI PDG standard for commercial off-the-shelf simulation package interoperability reference models. - In: 22nd Workshop on Principles of Advanced and Distributed Simulation, 2008, ISBN 978-0-7695-3159-5, (2008), S. 153
Commercial-off-the-shelf Simulation Packages (CSPs), visual interactive modelling environments such as Arena, Anylogic, Flexsim, Simul8, Witness, etc., are important "black box" software tools that support the development, experimentation and visualization of simulation models. They are widely used in commerce, defence, health, manufacturing and logistics. There is a growing need to link together, or to interoperate, models developed in these CSPs across computer networks. The motivations for this include data sensitivity, difficult to move resources and speed up. - There have been various attempts to create distributed simulations with these CSPs and their tools, some with the High Level Architecture (HLA). In this context, a distributed simulation or federation is composed of a set of CSPs and their models. A CSP will typically simulate its model using a discrete-event simulation algorithm. Each model/CSP represents a federate normally running on its own computer. In a distributed simulation, each model/CSP federate therefore exchanges data via a runtime infrastructure (RTI) implemented over a network in a time synchronized manner. The question is what data is exchanged and how is it done. The answer to these questions can be quite difficult and it is further compounded by no "standard" terminology between the CSPs. What is clear is that there is no common approach. Additionally, it is extremely difficult to identify the actual functionality of these implementations. As a step towards creating a common approach to interoperability between models and their CSPs, the COTS Simulation Package Interoperability Product Development Group (CSPI PDG) at the Simulation Interoperability Standards Organization have developed a standard set of Interoperability Reference Models (IRMs), the SISO CSPI PDG Standard for Commercial Off-The-Shelf Simulation Package Interoperability Reference Models. These IRMs state clearly interoperability rules for entity transfer, shared resources, shared events and shared data structures. - This talk will outline the processes by which these IRMs have been created, how they are intended to be used, and current progress in standardizing their implementation.
Simulation and visualization 2008 : proceedings of the 2008 Simulation and Visualization Conference, 28 - 29 February 2008. - Erlangen [u.a.] : SCS Publ. House, 2008. - XII, 351 S. ISBN 3-936150-53-2