Performance of GNSS beamforming algorithms using distributed sub-arrays in automotive applications. - In: Proceedings of the 31st International Technical Meeting of the Satellite Division of the Institute of Navigation, (2018), S. 4052-4063
lntroducing the "Cylinder Fit Test", a simplified edge strength measurement method for Ultra Thin Glass. - In: Glass in architecture and structural engineering, (2018), S. 65-73
Development of a mobile device for the evaluation of the current in-situ stress condition in glass - experimental and numerical analysis for bonded and mechanical joints. - In: ce/papers, ISSN 2509-7075, Bd. 2 (2018), 5/6, S. 435-444
Monitoring installation process and utilisation of glass and hybrid components in structural glass has become increasingly important. However, to date, there are no generally accepted standard procedures to evaluate the in-situ stress condition of a built-in glass. With the aid of photoelasticity a qualitative statement of the stress state in the glass can be made. For this reason, a measurement method and a functional model for a mobile device are being developed with which it is possible to measure in-situ and identify stress peaks, for example, due to incorrect assembly of a glass fitting. By supporting finite element method (FEM) simulations it is possible to transfer the qualitative results of photoelastic measurements into quantitative results.
https://doi.org/10.1002/cepa.943
Semi-active vibration reduction based on a variable structure controlled serial-stiffness-switch-system. - In: Proceedings in applied mathematics and mechanics, ISSN 1617-7061, Bd. 18 (2018), 1, e201800417, insges. 2 S.
https://doi.org/10.1002/pamm.201800417
Limitation of an adjustable two degree-of-freedom damper system for directional damping. - In: Proceedings in applied mathematics and mechanics, ISSN 1617-7061, Bd. 18 (2018), 1, e201800403, insges. 4 S.
https://doi.org/10.1002/pamm.201800403
Veränderung der Federdrahtparameter im Federherstellprozess. - In: Lehrgang "Kaltgeformte Federn" 2018, (2018), S. 261-278
Berechnungsprogramme für Schraubendruckfedern. - In: Lehrgang "Kaltgeformte Federn" 2018, (2018), S. 199-226
Berechnung, Toleranzen und Eigenschaften von Schraubenfedern. - In: Lehrgang "Kaltgeformte Federn" 2018, (2018), S. 177-198
Numerische Methoden bei der Federentwicklung. - In: Lehrgang "Kaltgeformte Federn" 2018, (2018), S. 89-122
Grundlagen der Lebensdauerberechnung. - In: Lehrgang "Kaltgeformte Federn" 2018, (2018), S. 59-88