I-FPS
Period of funding: 01.08.2021 - 31.01.2022
Compact, high-performance and highly integrated faint pulse source at 850 nm; subproject: E/O hardware platform for faint pulse source
H2Demo
Period of funding: 01.03.2021 - 28.02.2026
Development of demonstrators for direct solar water splitting
PlaTox
Period of funding: 01.03.2021 - 29.02.2024
Human placenta explants for medication tests
E-PunCH
Period of funding: 01.07.2020 - 30.06.2023
Electrowetting-Pump-on-a-chip: Software for the dimensioning of non-mechanical EWOD-driven microfluidic pumps
Fullerene
Period of funding: 01.05.2020 - 30.04.2023
Coatings with fullerenes and micro-structuring for dental implants
DEPECOR
Period of funding: 01.02.2020 - 31.03.2023
Direct efficient photoelectrocatalytic CO2 reduction
PaSic
Period of funding: 01.07.2020 - 31.12.2022
SiCer composite substrates for photoacoustic sensors
KerTauSens
Period of funding: 01.01.2020 - 31.12.2022
Development of a high-temperature resistant measuring system for online acid dew point detection in hot process exhaust gas environments of industrial plants to improve thermoprocess control for optimised fuel use efficiency
HIPS-VP2
Period of funding: 01.06.2019 - 31.08.2022
Growth Core HIPS-VP2: High Performance Liquid Sensors by SiCer - TP9: Development and construction of SiCer-based, multifunctional sensor systems for the application area "liquid sensor technology
SiCer-Basistechnologien
Period of funding: 01.09.2019 - 31.08.2022
Growth Core HIPS - VP1: Research into a multifunctional substrate technology for highest performance sensors - TP10: Development of SiCer-based technologies for applications in high-performance sensor technology
SiCer Messaufnehmer
Period of funding: 01.09.2019 - 31.08.2022
SiCer-based transducers for gas sensor applications
eMMA
Period of funding: 01.07.2019 - 30.06.2022
Development and application of a new in situ emission/ online / offline Mössbauer magnet analyser at ISOLDE (CERN) for hysteresis design in innovative magnetic materials for the energy transition
SAFEBOR
Period of funding: 01.12.2019 - 31.05.2022
Compartmentalised microarrays as a new multiplex PLUS diagnostic platform using the example of rapid and reliable Lyme disease detection
ForLab NSME
Period of funding: 01.01.2019 - 31.12.2021
Research Laboratory Microelectronics Ilmenau for Neuromorphic Electronics
SI - Mikrospritzguss
Period of funding: 01.06.2019 - 31.05.2021
Design and fabrication of the structural patterns as silicon masters, microfluidic and biochemical characterisation of the fluid chips
QUICKSTEP
Period of funding: 01.10.2018 - 31.03.2021
Construction of an mRNA/CAS library and implementation of a microfluidics study (TU-Ilm)
Prüfvorrichtung
Period of funding: 01.02.2019 - 31.01.2021
Automatic testing device of porous fluid structures preferably made of plastic material
INFERSAT
Period of funding: 01.01.2018 - 31.12.2020
Collaborative project: Integration of ferrite materials for components in satellite communications
NSF-E-Chem
Period of funding: 01.11.2021 - 30.10.2024
Photocataytic organic synthesis by high-efficiency planar semiconductors
SFB 1461/1
Period of funding: 01.01.2021 - 31.12.2024
Neuromorphic intelligent sensor system for sound perception - B03 memristive components and materials - C01 MEMS technology for adaptive sensors - C07
Galvanische Abscheidung
Period of funding: 01.07.2021 - 30.06.2024
Electroplating of reactive layer systems with dispersed nanoparticles
3D-Printer
Period of funding: 01.01.2021 - 31.12.2023
3D Printer-Gas-Phase Synthesis, Transport, and Parallel Printing of Charged Nanoparticles
Lokalisierter Transport aus der Gasphase
Period of funding: 01.01.2018 - 31.12.2023
Localised transport from the gas phase
Fluidische Montage
Period of funding: 01.10.2020 - 30.09.2023
Fluidic Assembly of Microscopic Elements - A Hybrid Approach Exploring New Methods of Deterministic Assembly Transport and Static Surface Stress Driven Self-Assembly
Mehrdimensionale Feinstpartikelfraktionierung
Period of funding: 01.09.2020 - 31.08.2023
Multidimensional fine particle fractionation with surface acoustic waves
NMVAC
Period of funding: 01.04.2020 - 31.03.2023
Neuromorphic Memristive VLSI Architectures for Cognition
Nanowires
Period of funding: 01.01.2020 - 31.12.2022
Analysis of charge carrier transport in radial and axial charge-separating contacts made of III/V semiconductor nanowires
2D und 3D Werkstoff-Morphologien
Period of funding: 01.10.2019 - 30.09.2022
2D and 3D material morphologies for reactive microjoining in electronics
2D und 3D
Period of funding: 01.10.2019 - 30.09.2022
2D and 3D material morphologies for reactive microjoining in electronics
DEOP
Period of funding: 01.11.2019 - 30.09.2022
Dynamics of electrons in surface-modified photocathodes
PhoMAS
Period of funding: 01.11.2019 - 30.09.2022
Energetic matching of internal contacts and tailored interfaces in photoelectrochemical multi-absorber solar cells
Scaling and Transfer Effects in Reactive Materials
Period of funding: 01.10.2019 - 30.09.2022
Metallurgical and thermal processes and thermomechanical treatment of materials
DFG Gerätezentrum
Period of funding: 01.12.2013 - 31.07.2022
Micro-Nano Integration" Equipment Centre
NiAl Multischichten
Period of funding: 01.07.2019 - 30.06.2022
Influence of stress and deformation on phase formation in reactive Ni/Al multilayers
Reactive microjoining and packaging
Period of funding: 01.07.2019 - 30.06.2022
Reactive microjoining and packaging - mechanical, thermal and electrical functionalities
2D-Einzelzellanalyseanordnung
Period of funding: 01.03.2019 - 28.02.2022
Flow and temperature investigations on a micro-acoustic 2D single analysis setup
Emmy-Noether-Programm
Period of funding: 01.01.2019 - 31.12.2021
Controlled electrochemical energy conversion through near-surface flow influence
Dehnbare Aufbau- und Verbindungstechnik
Period of funding: 01.01.2019 - 31.12.2021
Stretchable body and connection technology
Tailored Disorder
Period of funding: 15.10.2015 - 30.09.2022
Fluctuation-dominated materials for novel photonic structures
Multipass-Laserstrahl
Period of funding: 01.05.2019 - 30.04.2021
Precision generation and measurement of small static and dynamic forces using radiation pressure of a multipass laser beam
ULTIMOS 2
Period of funding: 01.11.2019 - 30.04.2021
Ultimate Scaling and Performance Potential of MoS2 Metal Oxide Semiconductor Field Effect Transistors
ForInt
Period of funding: 01.07.2018 - 30.06.2021
Formation of heterovalent interfaces: A combined photoemission and ab initio DFT study of GaP/Si heterostructures
3D-Charakterisierung
Period of funding: 01.07.2018 - 30.06.2021
3D characterisation of microspheres with nanometre precision
Nanodrähte
Period of funding: 01.11.2017 - 31.10.2020
Functional nanoparticle assembly through dewetting of thin films
RSML-Workstation
Period of funding: 01.10.2021 - 30.06.2023
Atomic resolution scanning ion microscopy and lithography workstation
KombiSens
Period of funding: 01.09.2021 - 30.06.2023
Combinatorial high-throughput in situ nano-diagnostics for sensing (high-throughput in situ scanning electron microscope - SEM)
Quanten-HUB Thüringen
Period of funding: 01.05.2021 - 31.12.2023
Execution of research tasks to achieve the objectives of the work packages Q1.2, Q1.3, Q3.4, Q2.1, Q2.9,Q2.10, Q2.11, Q3.4, Q3.6, Q3.8, according to the overall network outline of the Quantum Hub Thuringia
Quanten-HUB Thüringen Koordination
Period of funding: 01.05.2021 - 31.12.2023
TU Ilmenau-side coordination office of the Quantum-HUB Thuringia (QHUBTh) to promote networking, overarching coordination and research transfer of quantum technologies Thuringia
Forschergruppe E-PhoQuant
Period of funding: 01.01.2021 - 31.12.2022
Heterogeneous electronics-photonics integration for the realisation of quantum optical components
Forschergruppe FastPhoton
Period of funding: 01.01.2020 - 31.06.2022
Ultra-wideband high-frequency control of fibre-coupled laser diodes for polarisation- and time-stamp-encoded single photons in quantum communication at the Thuringian Innovation Centre InQuoSens
Forschergruppe 2D-SENS
Period of funding: 01.04.2019 - 31.03.2022
Ultrasensitive energy-efficient gas sensors made of 2D materials
InQuoSens
Period of funding: 01.11.2017 - 31.01.2022
Establishment and development of the Thuringian Innovation Centre for Quantum Optics and Sensor Technology, sub-location Ilmenau
Drucksinterofen
Period of funding: 01.01.2020 - 30.09.2021
Pressure sintering furnace for the production of composite substrates
Weitbereichsellipsometer
Period of funding: 01.01.2020 - 30.06.2021
Spectroscopic wide range ellipsometry
Laserdirektbelichter
Period of funding: 01.01.2019 - 30.06.2021
Laser lithography system for direct exposure of photoresists
SPIRIT
Period of funding: 01.04.2018 - 31.03.2021
Thin-film glass LTCC interposer for industrial sensor technology
Forschergruppe FOQUOS
Period of funding: 01.03.2018 - 28.02.2021
Quantum optical imaging with amplified photons at the Thuringian Innovation Centre InQuoSens
MUNOZIT
Period of funding: 01.11.2019 - 31.10.2021
Development of a strategic concept for permanent cooperation between the German Cancer Research Centre in Heidelberg and the TU Ilmenau and other institutions in Thuringia.
DNA Ident
Period of funding: 01.10.2018 - 30.09.2020
Design and creation of compatible building blocks for the generation of longer DNA molecules for information storage of biological and non-biological data
MemWerk
Period of funding: 01.04.2020 - 31.03.2025
Memristive materials for neuromorphic electronics
SIMGAM
Period of funding: 01.01.2021 - 31.12.2021
Simulations and games in the self-learning phases of a blended learning basic course
VR-Micro
Period of funding: 01.01.2020 - 31.12.2021
Virtual Reality - Teaching of Complex Microtechnologies
NANOPrint
Period of funding: 01.04.2019 - 31.03.2021
3D printer for the generation of nanostructures from the gas phase
MetroBase
Period of funding: 01.01.2017 - 31.12.2020
New metrological basis of highest precision
PRIME
Period of funding: 01.03.2016 - 29.02.2020
Project group "Integrated mm wave radio technology"